Aluminum Casting of LED Housing/Shell

High precision Aluminum Casting of LED Housing/Shell

this LED Streetlight use ADC-12 as material.For this part

1,if the drawings are not specified. The setting of the Die Casting process, such as the position of the ejector pin, the location of parting line, the location of the gate and the overflow port, shall be stipulated by the manufacturer itself; otherwise, the drawings shall be specified or agreed by both 

2,die castings need special machined surfaces, such as polishing, shot peening, chrome plating, coating, anodizing, chemical oxidation, etc., must be marked on the drawings or agreed 

3,If the die casting can meet its use requirements, the essential defects of the die castings are not the basis for scrapping.  the pressure sealing, hydraulic sealing, heat treatment, high temperature coating, internal defects (porosity, porosity, cold separation and inclusion) of the casting can be agreed.

Lamp Accessories: LED Lamp Housing/Shell

Die Casting Machine: 280 ton
1 product per die
Material: ADC-12
Product Dimensions:220mm*170mm*48mm
Casting Precision: Grade GB-CT5
Machining Accuracy Screw Thread: H6
Technological Process: Die casting, Degate, Burring,CNC Milling, Polish, Powder Painting, Cleaning, Packing, Delivery
Control Measure: First item inspection, Routing inspection, Final item inspection, Incoming test and Outgoing quality control
Inspection Equipment: Calipers and Screw Gauge
Surface Treatment: Powder coating(electrostatic powder spraying)

Certificate: ISO/TS16949:2009
Lead Time: 30-35 days
Trade Term: FOB Ningbo